author avatar
    Technology Manager of Test Dept.


Do you know how to set the USB disk to be the first boot option in Windows 10? Here, we will go to get more about how to set boot Windows 10 from USB flash drive and how to create USB boot media for Windows 10 as well as get access to Windows Recovery Environment with this media to fix computer which is failed to boot.

1. How to Boot Windows 10 from USB Flash Drive in BIOS

1. Start your computer and please press related button to get into BIOS when the logo of the motherboard manufacturers pop up on the screen. The button could be different on the basis of the manufacturer. But probably could be DEL or F2. Please click here to know about how to change the boot order of your computer.
2. Fast Boot function is equipped in Windows 10. If you enable this function, your computer will be failed to boot from USB. If you want to boot the computer from USB, please select [Boot] after getting into BIOS and then select [Enabled] in Launch CSM.
choose enabled in launch csm to sovle windows 10 won't boot from USB
3. You will get into BIOS after restart. Please find [BOOT] tab and set the related USB disk to the first boot option. Save the settings and exit. Then your computer will boot from USB disk after restart.
boot windows 10 from usb

2. How to Create Windows 10 USB Installation Disk

We can download Windows 10 Media Creation Tool from Microsoft. Then we can create Windows 10 bootable media with this download tool. When system gets wrong, we can fix or even reinstall the system with this installation disk.
Download link:
Please click [Download tool now] after loading into the web page to get the MediaCreationTool.exe.
download Windows 10 installation media tool how to install os on a ssd
Attention: Please make sure the capacity of the USB disk reach 8GB at minimum. It is recommended to create the installation disk with a blank USB disk because all data inside the USB disk will be erased when creating the installation disk. Please connect the USB disk to computer after preparation.
1. This is the first screen you will see after launching Windows 10 Creation Tool. Please click [Accept] after you check the agreement.
media creation tool license
2. Please click [Create installation media for another PC] and continue.
create media Windows 10
3. Then we can select language, edition and architecture for the Windows 10 system. It will select [Use the recommended options for this PC] in default. If you want install system in different computers with this system installation disk, it is recommended to select [Both] in [Architecture]. Generally, x64 is recommended in new computers.
media creation tool select architecture
4. Select the target disk which you want to save the Windows 10 installation file. Here we should choose [USB flash drive]. Besides, please make sure the minimum capacity of the USB disk is 8GB.
select USB flash drive
5. Please select target USB disk in the list and then click [Next]. (This step will delete all data inside the USB disk as well as format the USB disk as FAT32. Please backup data inside the USB disk beforehand.)
refresh the USB list
6. Then it will download and verify Windows 10 Image. And will format the USB disk and saving new files to the USB disk. Duration of this process will be based on the Internet and computer hardware.
downloading windows 10 iso
7. You will receive the notification that [Your USB flash drive is ready] which means that your USB installation disk has been created successfully.
USB flash drive ready

3. Get Access to Windows Recovery Environment with Windows 10 Installation Media

Sometimes, Windows 10 Update will fail to configure because of some accident when installing. As a result, users can not get into system or Windows Recovery Environment with traditional methods. Here, we may need to reinstall whole Windows system to solve this problem. But we can try to get access to Windows Recovery Environment with system installation disk before system re-installation.
1. Set target computer to boot from Windows 10 USB installation disk with steps above. Then click [Next] when you get into the page as below.
how to reinstall windows10 boot install screen
2. Select [Repair your computer] at the left-bottom corner of the Installation interface.
Repair your computer
3. Then you will get into Windows Recovery Environment. Please select [Troubleshoot] and then [Advanced Options].
select troubleshoot in windows safe mode
4. Click [Startup Repair] to fix the system bootable failure.
startup repair in Windows
5. If [Startup Repair] can not fix the problem, please return to [Advanced Options] and select [Reset this PC]. Then please reinstall Windows 10 with the installation disk you created.
reset PC

4. Rescue Computer Data with Renee Passnow

If your computer still can not start after repair, you may need to reinstall system to solve this problem. However, system reinstallation will erase all data inside the system disk and you may want to get back important data inside the system disk. How to get back the important data when system fails to work? Data Transfer function in Renee Passnow is worth to try if you want to get back the important data from system disk.

More about Renee Passnow

Reset Windows login password with only 4 simple steps but not damage data inside! Do not require any professional knowledge or possible password combinations.

For local account and administrator, Renee Passsnow will remove the password directly.

For Microsoft account, Renee Passnow will turn the Microsoft account into local one and reserve all data inside the account.

Renee Passnow can help to recover data or transfer data inside the disk without running Windows.

Compatible with: Windows 10, 8.1, 8, 7, Vista, XP.

Download Now
people has downloaded and reset the password successfully!
1. Download and install Renee Passnow. Open the software. Select one option from [Crate a Live USB] and [Create a Live CD]. Then, select [x64] or [x86] according to your computer. Next, click on [Download Now] to download the licensed ISO. Remember to activate the software beforehand. After that, click on [Create USB] to create the boot media.
use renee passnow to create usb to reset passnword
2. Restart the computer and get into BIOS to set computer to boot from [CD-ROM Drive] or [Hard Drive]. Save the settings and exit BIOS.
change boot order in BIOS menu
3. After computer boot from the bootable media and get into Renee Passnow interface, please select [Data Transfer].
data transfer and data recovery in Renee Passnow
4. Please connect the disk you want to save the important data and then select target files from the original system disk. Drag the files to the target disk.
Data transfer function of Renee Passnow